Put in an hour today, and closed up the front cylinder.
At least it was something.
Event Calendar
Tuesday, June 7, 2011
Saturday, June 4, 2011
Day 8 - start assembling the second cylinder
So, on Friday evening I tried to complete the second cylinder, but I kept getting interrupted. I did manage to disassemble the the rocker box and do some cleaning.
I did the same steps before, using the compressor to blow out the rocker shafts and rocker arms. I did not encounter anything unusual.
I assembled the rocker box onto the head. That is as far as I got.
Another 1 put into the job.
I did the same steps before, using the compressor to blow out the rocker shafts and rocker arms. I did not encounter anything unusual.
I assembled the rocker box onto the head. That is as far as I got.
Another 1 put into the job.
Tuesday, May 31, 2011
Day 7 - Kawi engine reassembly
ok. So I went into the garage thinking I was only going to take apart and clean the rocker boxes. I figured the only other thing to worry about besides the HLAs was an oil passage and oil delivery to the HLA.
Well, when I got the first one apart, it didn't seem like a big deal.
I turned out the rocker shafts one at a time, keeping track of what went where.
Everything seems ok, so I am going to change the o-rings on the shafts and assemble the rocker box.
So, now I plunge into completing this cylinder, since everything seems so easy. I put permatex on the head and assembly oil on the CAM. [The permatex job would have went easier with a small brush.With my finger it was a pain. I hope I put enough permatex on, especially at the CAM bushing. It tacked up quickly on this warm, muggy evening.]
After torquing down, I install the CAM chain tensioner and the oil line.
Nothing left to do now but put the rocker box cover back on. This requires using the permatex to hold the rubber bumpers in place on the cover and put the gasket in place.
And the finished cylinder... though I still have to verify the cover is torqued properly. (I was having trouble reading the in-lb markings on the torque wrench)
This was another 2 hours.
Well, when I got the first one apart, it didn't seem like a big deal.
I turned out the rocker shafts one at a time, keeping track of what went where.
Here we can see the holes in the shaft where the oil delivery comes from to get to the rockers. I use the compressor to blow out this passage, covering different holes as I test.
The rockers delivery the oil thru their body to the cavity where the HLA sits. I use the compressor again to verify these passages are clear.Everything seems ok, so I am going to change the o-rings on the shafts and assemble the rocker box.
So, now I plunge into completing this cylinder, since everything seems so easy. I put permatex on the head and assembly oil on the CAM. [The permatex job would have went easier with a small brush.With my finger it was a pain. I hope I put enough permatex on, especially at the CAM bushing. It tacked up quickly on this warm, muggy evening.]
After torquing down, I install the CAM chain tensioner and the oil line.
Nothing left to do now but put the rocker box cover back on. This requires using the permatex to hold the rubber bumpers in place on the cover and put the gasket in place.
And the finished cylinder... though I still have to verify the cover is torqued properly. (I was having trouble reading the in-lb markings on the torque wrench)
This was another 2 hours.
Saturday, May 28, 2011
Parts are in earlier than expected
I picked up the parts earlier than expected. Now if I can only make time to work on the bike.
I also should get manifold gaskets for the new exhaust.
I also should get manifold gaskets for the new exhaust.
Wednesday, May 25, 2011
Yee-hah ... the new exhaust arrived
I bought a Cobra exhaust for the bike on eBay. New pipes from a dealer but they did not have the original packing so it came in a plain box. They look great and they were around a quarter of the cost.
Also, I saw Mark's Triumph gas tank today after is had been powder coated. It looks beautiful, but I forgot to take a picture.
Also, I saw Mark's Triumph gas tank today after is had been powder coated. It looks beautiful, but I forgot to take a picture.
Tuesday, May 24, 2011
Day 6 - exercising the HLAs
Well, I decided to tinker a little more tonight. I took off the external oil lines to the rocker boxes, sprayed them out with WD40 and then blew them out with the compressor.
Then I decided to exercise the HLAs a little more, but this time following the tack I found on other websites. I took them out of their oil bath one at a time and put them in a WD-40 bath and exercised the check ball and then the plunger. I saw even more crud come out in little streams. Then I burped them again in the motor oil. This was much more satisfying.
And another hour spent on the bike... How many hours does that make?
Oh well, still waiting on gaskets anyway.
Then I decided to exercise the HLAs a little more, but this time following the tack I found on other websites. I took them out of their oil bath one at a time and put them in a WD-40 bath and exercised the check ball and then the plunger. I saw even more crud come out in little streams. Then I burped them again in the motor oil. This was much more satisfying.
And another hour spent on the bike... How many hours does that make?
Oh well, still waiting on gaskets anyway.
Monday, May 23, 2011
I will now suffer from parts lag
I just ordered parts and I probably won't see them for a week, unless I want to spend an extra $50 to get them sooner. Dang ....
Subscribe to:
Posts (Atom)


















